View P3500Q12BLRP_1292913.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Q2L Series SIDACtor(R) Device
Data Sheets
The Q2L SIDACtor series provides bidirectional transient voltage protection in a low profile, chip scale package. The small package QFN (Quad Flatpak No-Lead) is ideal for dense board applications such as line cards, modems, phones, fax machines, and other telecommunication equipment.
PIN 1 PIN 2
Features:
* RoHS compliant * Chip Scale Package (CSP) sizing * Wide range of IPP ratings including:
Protection solution to meet:
* * * * * * *
75A for 5x310/10x700s ITU/YDT waveform 80A for 10x1000s GR 1089 waveform 100A for 10x560s TIA-968 * Bidirectional transient voltage protection * Small footprint (QFN) * Teccor(R) brand SIDACtor technology * Recognized under UL E133083 file number
YD/T 950 YD/T 993 YD/T 1082 GR 1089 Inter-building IEC 61000-4-5 ITU K.20/21 TIA/EIA-IS-968 Basic Recommendations
Electrical Parameters
Part Number Marking XXXX VDRM @ldrm=5A Volts Min P0080Q12ALRP P0300Q12ALRP P0640Q12ALRP P0720Q12ALRP P0900Q12ALRP P1100Q12ALRP P1300Q12ALRP P1500Q12ALRP P1800Q12ALRP P2300Q12ALRP P2600Q12ALRP P3100Q12ALRP P3500Q12ALRP P0080Q12BLRP P0300Q12BLRP P0640Q12BLRP P0720Q12BLRP P0900Q12BLRP P1100Q12BLRP P1300Q12BLRP P1500Q12BLRP P1800Q12BLRP P2300Q12BLRP P2600Q12BLRP P3100Q12BLRP P3500Q12BLRP P-8A P03A P06A P07A P09A P11A P13A P15A P18A P23A P26A P31A P35A P08B P03B P06B P07B P09B P11B P13B P15B P18B P23B P26B P31B P35B 6 25 58 65 75 90 120 140 170 190 220 275 320 6 25 58 65 75 90 120 140 170 190 220 275 320 VS @100V/s Volts Max 25 40 77 88 98 130 160 180 220 260 300 350 400 25 40 77 88 98 130 160 180 220 260 300 350 400 IH mAmps Min 50 50 150 150 150 150 150 150 150 150 150 150 150 50 50 150 150 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 IS mAmps IT Amps VT @IT=1 amp Volts Max 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Min 25 15 40 40 35 30 25 25 25 25 25 20 20 25 15 40 40 35 30 25 25 25 25 25 20 20 Capacitance @1MHz, 2V bias pF Max 55 35 60 60 55 50 45 40 35 35 35 35 30 55 35 60 60 55 50 45 40 35 35 35 35 30
* All measurements are made at an ambient temperature of 25C. IPP applies to -40C through +85C temperature range. * IPP is a repetitive surge rating and is guaranteed for the life of the product. * Listed SIDACtor devices are bidirectional. All electrical parameters and surge ratings apply to forward and reverse polarities.
* VS is measured at 100 V/s. * Off-state capacitance is measured at 1MHz with a 2 V bias and is a typical value for "A" and "B" rated product.
www.littelfuse.com * +1 (800) 999-9445
1
(c)2005 Littelfuse * Telecom Design Guide
Q2L Series SIDACtor(R) Device
Surge Ratings
Series 2x10s Amps Min A B 150 250 1.2x50s/8x20s Amps Min 150 250 Ipp 10x160s Amps Min 90 150 10x560s Amps Min 50 100 10x1000s Amps Min 45 80 ITSM AC 60Hz Amps Min 20 20 Amps/s Max 500 500 di/dt
Thermal Considerations
Package QFN Symbol TJ TS
PIN 1 PIN 2
Data Sheets
Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient
Value -40 to +150 -65 to +150 120
Unit C C C/W
R0JA
V-I: Characteristics
+I
V-I: Pulse Wave-form
IPP - Peak Pulse Current - %IPP
tr = rise time to peak value td = decay time to half value
IT IS IH
100
Peak Value
Waveform = tr x td
-V
IDRM VT VDRM
+V
50
Half Value
VS
0
0
-I
tr
td
t - Time (s)
V-I: Junction Temperature
14 12 10 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160
V-I: Holding Current/Case Temperature
Percent of VS Change - %
IH (TC = 25 C)
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160
IH
25 C
25 C
Ratio of
Case Temperature (TC) - C
Junction Temperature (TJ) - C
www.littelfuse.com * +1 (800) 999-9445
2
(c)2005 Littelfuse * Telecom Design Guide
Can be A or B
Q2L Series SIDACtor(R) Device
Part Numbering
Can be A or B
Device Marking
Pxxx0Q12ALRP
PACKING STYLE RP : Standard: Embossed carrier tape and reel per EIA 481-1, 12mm tape in 13" reel.
DEVICE TYPE P : SIDACtor MEDIAN VOLTAGE xxx : xxx volts CONSTRUCTION VARIATION 0 : Single SIDACtor chip used as a single device
XXXX YYYY
First Line: Product Name Second Line: Lot number
L : RoHS Compliant SURGE Ipp Rating A : 50AMP 10x560s B : 100AMP 10x560s PACKAGE TYPE C Q12 : QFN, 3.0mm x 3.0mm, two leaded package E
J
TOP VIEW
A
BOTTOM VIEW
Data Sheets
Mechanical Drawings and Recommended Solder Pad Outline B F
TOP VIEW
A
BOTTOM VIEW
C J E
END VIEW
B
H
SIDE VIEW
F M1 M2 K2
1.50 (.059") 1.27 (.050")
2.54 (.100")
N2 N1
K1
END VIEW
H
SIDE VIEW
M1 M2
1.50 (.059")
Recommended Soldering Pad Outline 2.54 (Reference Only) (.100")
1.27 *Reference Tech Brief (.050") (EC642) for soldering
K2
N2 N1
K1
recommendations
Recommended Soldering Pad Outline (Reference Only)
Mechanical Dimensions
Dimensions Min A B C E F H J K1 K2 M1 M2 N1 N2 0.114 0.114 0.075 0.011 0.076 0.035 0.000 0.004 0.004 0.056 0.038 0.096 0.082 Inches Typ 0.118 0.118 0.079 0.015 0.080 0.039 0.004 0.008 0.008 0.060 0.042 0.100 0.086 Max 0.122 0.122 0.083 0.019 0.084 0.043 0.008 0.012 0.012 0.064 0.046 0.104 0.090 Min 2.900 2.900 1.900 0.285 1.930 0.900 0.000 0.100 0.100 1.430 0.970 2.440 2.080 Millimeters Typ 3.000 3.000 2.000 0.385 2.030 1.000 0.100 0.200 0.200 1.530 1.070 2.540 2.180 Max 3.100 3.100 2.100 0.485 2.130 1.100 0.200 0.300 0.300 1.630 1.170 2.640 2.280
www.littelfuse.com * +1 (800) 999-9445
3
(c)2005 Littelfuse * Telecom Design Guide
C
A
D
N
B
Q2L Series SIDACtor(R) Device
W1
Tape and Reel Dimensional Drawings
Reel Dimension
D0
C
T
N
P0 P2
D1
CARRIER TAPE E1
A
D
B0
F
B
W1
W0
E2 W
K0
P1
A0
COVER TAPE
Reel Dimension
Tape Dimension Items
Data Sheets
D0
T
P0 P2
D1
CARRIER TAPE E1
CARRIER TAPE
COVER TAPE
END
START
B0
F
W0
E2 W
TRAILER 160mm MIN
LEADER 400mm MIN
K0
P1
COVER TAPE
A0
Tape Dimension Items
Tape Leader and Trailer Dimensions
CARRIER Tape and Reel Dimensions TAPE
COVER TAPE
END
START
Description Reel Diameter
LEADER 400mm MIN
Symbols
TRAILER A 160mm MIN
Inches Maximum 12.992 N/A 0.531 N/A N/A 0.567 0.134 0.134 0.063 N/A 0.073 0.408 0.219 0.051 0.161 0.319 0.081 0.014 0.484 0.366 Minimum N/A 1.50 12.80 20.20 50.00 12.40 3.20 3.20 1.50 1.50 1.65 10.15 5.45 1.00 3.90 7.90 1.95 0.25 11.50 9.10
Millimeters Maximum 330.0 N/A 13.50 N/A N/A 14.40 3.40 3.40 1.60 N/A 1.85 10.35 5.55 1.30 4.10 8.10 2.05 0.35 12.30 9.30
Minimum N/A 0.059 0.504 0.795 1.969 0.488 0.126 0.126 0.059 0.059 0.065 0.400 0.215 0.039 0.153 0.311 0.077 0.010 0.453 0.358
B
Drive Spoke Width
Tape C Leader and Trailer Arbor Hole Diameter Dimensions
D N W1 A0 B0 D0 D1 E1 E2 F K0 P0 P1 P2 T W W0 Drive Spoke Diameter Hub Diameter Reel Inner Width at Hub Pocket Width at bottom Pocket Length at bottom Feed Hole Diameter Pocket Hole Diameter Feed hole position 1 Feed hole position 2 Feed hole center-Pocket hole Pocket Depth Feed Hole Pitch Component Spacing Feed hole center-Pocket hole Carrier Tape Thickness Embossed Carrier Tape Width Cover Tape Width
www.littelfuse.com * +1 (800) 999-9445
4
(c)2005 Littelfuse * Telecom Design Guide

▲Up To Search▲

Price & Availability of P3500Q12BLRP

	To Download P3500Q12BLRP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .